Geosynthetic clay liners (GCLs) are an established sealing product in the geoenvironmental industry. They are used in landfill caps and base liner applications under roads, railways, secondary containment for above ground tank farms, as well as within various other containment structures such as dams, canals, ponds, rivers and lakes. They are also used for waterproofing of buildings and other similar structures.
Rolled out like a carpet to provide a durable impermeable liner,
geosynthetic clay liners consist of a layer of high swelling sodium
bentonite, sandwiched between two geotextiles. by different
techniques, manufactured GCL, taishanshen, is mechanically bonded
by needlepunching from one nonwoven geotextile through the
bentonite to the other nonwoven or woven geotextile.
Sodium Bentonite is a naturally occurring clay with hundreds of
uses. Comprising mainly montmorillonite, a layered clay mineral
with broad flat platelets which are ideally shaped to provide a
hydraulic barrier. Sodium ions located between these platelets
allow water to hydrate the bentonite in an absorption reaction that
results in the bentonites swelling characteristics. swells when
contacted with water approximately 900% by volume or 700% by
weight. When hydrated under confinement, the bentonite swells to
form a low permeability clay layer with the equivalent hydraulic
protection of several feet of compacted clay.
This swelling allows the bentonite to seal around penetrations,
giving the GCL self sealing characteristics. During hydration, a
confined layer of dry bentonite changes into a dense monolithic
mass with no observable individual particles. A fully hydrated
sodium bentonite layer can have a hydraulic conductivity of
approximately one hundred times lower than a typical compacted clay
liner (CCL).
Because of their low hydraulic conductivity, GCLs are used mainly
as a replacement for thick, difficult to build, compacted clay
liners to provide a barrier to liquids and gases.
Permathene supply and install a range of GCL's from light to heavy
grades. These are high performance environmental liner comprised of
geosynthetic carrier components integrated with a layer of low
permeability sodium bentonite. The rolls are supplied in wide
widths, minimising seams. Installation is fast.
GCL (geosythetic clay liners)technique index:
MATERIAL PROPERTY | TEST METHOD | REOUIRED VALUES |
Bentonite Mass/Area2 | 3.6kg/m2 min | |
1×10-8m3/m2/sec max | ||
5×10-9cm/sec max | ||
See more products from this supplier.
Do you want to show products of your own company? Join FREE now!